How To Clean Your Skateboard Bearings and Wheels

By : Admin

Skateboard Bearings Cleaner

As with any motor vehicle or the other, skateboard also require routine maintenance. When you hear the sound that is not reasonable or squeaking from your skateboard bearings, or your skateboard wheels does not rotate as it should, then this is the time for you to do service for your skateboard.

Here are tips how to clean and care for your skateboard :

1.  Release  the skateboard wheels from the trucks using a socket wrench or a skate tool.

2.  Then, remove from the bearings. To do this, almost back to hook the wheel axle (which must be shot hooked to the end of the axle) and slowly pry the wheel, with the bullet out poping. You must be very careful when doing this, because it can damage the bearings. (But if you plan to replace the old bearings with new, you can purchase hard as you want but be careful not to damage the wheels.)

3.         Once you have separated the bearings from the wheels, you can now clean them separately.

4.         To clean the wheels, use water or mild soap and water solution. Brush the dirt off the wheels or simply wipe them with rag or towel. Check and remove dirt embedded in and around the wheel. Dry the wheels with cloth or towel.

5.         Now, clean the bearings. Take one bearing and spray every edge with a generous amount of Tri-flow Superior Lubricant. Do this on both sides of the bearings. Make sure that you are able to flush away all the dirt inside and in between the ball bearings. Repeat the same procedure to the rest of the bearings.

6.         Once you are done with all the bearings, you can attach them one by one back to the wheels immediately or let them leak and dry first.

7.         Reattach the wheel and bearings assembly back to the truck.

If you have the time to do all these, you can do like the tips  above, and the opposite if you too busy to do like that, just clean the bearings while still inside the wheel. To do this, remove the wheels from the truck and spray Tri-flow Superior Lubricant directly to the bearings. Put down the wheels assembly to remove the lubricant inside. Then, reattach the wheels back to the trucks. While you cleans the bearings, you may want to periodically remove the bearings off its wheel for thorough maintenance.

This routine activity not only save your money, because you should not need to buy a new skateboard. But more than that you will improve your skateboarding experience, and it also will extend your skateboard bearings and wheels  lifespan. Even the process looks to be meticulous but it could be so simple if you do it routinely.

How To Choose  Skate Board For Beginner

By : Admin

Skate Board Player

Buy a skate board for the first time sometimes create confusion. Especially for a beginner skate boarder. At this time there are so many kinds of skate board for sale in the store online or offline. Some tips below will make it easier for you to determine which  the skate board according to your needs.

Cost. Previously set budget costs that will be used to buy a skateboard. Because prices can determine the quality of a skate board. The principle is basically always look back on the functional and power-base skate board as a whole, including the skate board, skate board bearings, trucks, and wheels. It costs about $ 30 to $ 70 for starter skate board.

Some of the skate board costs more expensive and sometimes make you pay for something that does not need to; there is also a rather cheap and you will pay junk. And this is the point, you can buy a standard used especially for a beginner skate board.

Skate board Wheels and Bearings. Special on skate board wheels and bearings this is a note on the spinning wheels when you stop pushing. There are different standards of assessment (measured using the ABEC value) that determines the speed of Bearings. ‘AA’ Bearings have a slow speed, so that will help you maintain a very slow speed on the road to decline, so will not provide the speed on the flat surface.
For beginners, you can start with ‘AA’, followed by ABEC 3, ABEC 5, ABEC 7, and ABEC 9. Most  of the beginner use ABEC 3 or higher ABEC 5. Bearings may not provide the answer but will move to the fastest bearings not good either.

Skate board Trucks . Some of the skate board trucks made this special to do various tricks and special difficult. For this one quality is the main consideration.

Skate board Deck. If you want to select the best skate board deck, sometimes you can get one without the graphics. Why? Some brandings and design can make a skate board deck to be expensive. In addition, the deck can easily design early is not feasible with the number of skating. Rather than focus on the cool graphics, get a 7-ply deck and observe the form of the deck. Getting a good amount of curve to kicktails.

As a beginner in playing skate board, the most ideal for you is to get a reasonable price for a skate board that most have to consist of 7-ply deck, durable tracks, and ABEC 3 or 5 Bearings.

Sphere: Related Content

Decide Your Skate Boarding Posture

By : Admin

Skate Boards

Playing skate  boarding has a a different way to  start   for each player. It  depends on the habit and the comfort of their own . Skate boarding has two postures  as well : The Goofy posture and the Regular posture.

It is significant to make out which one to apply in order to get maximum comfort at any time you go skate boarding. To understand which position is comfortable for you, try some of these guidelines.

First of all, the goofy position is where you lay down your right foot in the front. Regular stance is where you place your left foot ahead and right foot at the backside. Try some of these tips in order to know which stance you will be most comfy with.

The first technique is by getting a ball. Whichever foot you are comfortable kicking it with will likely be your back foot. You have to remember that the balancing foot should be on front and the kicking foot should be at the back of the board.

Next, try going up a staircase and observe which foot you use on your first step. Whichever foot you use will be your back foot on the skateboard. This means that if you use your right foot to go up the stairs first, you will likely be comfortable using the regular stance.

Another way to find out which stance you use is by getting someone to push you while you are standing still. This will get you off balance and whichever foot you use to catch yourself will be your back foot.

Like most people who are right handed, most skateboarders use the regular stance. This is why regular stance is called regular as it is used by most skateboarders.

There is really no right way to know what kind of stance you want to use. Try skateboarding using both stances. Whatever is more comfortable is the one that you should use. Whether it is regular or goofy stance, you will see that skate boarding is a lot of fun.

Remember these tips and you will be able to know which stance you will want to use. Although it doesn’t necessarily mean that you should go and use regular stance if you kicked the ball with your right foot, it just basically means that it is a good way to find out what kind of stance you will most likely be comfortable with.

Whichever stance you use, always remember to be safe. Always use safety gear and you will see that skate boarding will be a lot more fun.

Skate Clothing – Make Up Your Own Style

By: Admin

There is something to be interesting in playing skateboard. The skateboarder, beside have to wear the correct equipment skateboard and learn to do fantastic movement tricks, they also have their own style in the skate clothing like skateboarder culture in general.

Skate Clothing

The skateboarder can determine their own skate clothing. In general, they resemble the style urban, punk, or hip-hop.

Pants. Skateboarders are known to wear baggy pants. Denim jeans are a mainstay. Consider corduroy pants as well. If you want to be authentic, wear the same denim jeans over and over again. Wash them only when you want to.

Play skateboard should not wear shorts. But use a loose-fitting pants and not shorts. Of course, the baggy pants can make you move freely. Wearing shorts are comfortable, but you expose the body and legs so that makes it easier for you injured and bruises.

T-Shirt. Any t-shirt will do but the most popular are graphic shirts and just plain white and worn out t-shirts. Basketball jerseys are okay too.

Shoes. It is okay to skate on regular shoes but if you are planning to do some serious skateboarding, buy a good pair of skateboarding shoes.

Beanies or caps. Any baseball cap or beanie will do but it would be better to wear old ones.

Underwear. Go for bright colored underwear. Now, since you chose to wear baggy pants, you may want to expose your underwear to complete the hip-hop look.

Socks. Optional! But if you want to wear a pair, get ankle-length pair of black socks.

Belts and buckles. A nice quality belt should keep your baggy pants securely fastened to your waist. Wear leather or a web belt with belt buckle design of your choice.

Sweatshirt and Hoodie. If its cold and you need another layer of clothing, then a sweatshirt or hoodie that is street-themed is better than jackets.

Skate clothing is how the private individual of each player in terms of  clothing. You can specify whatever you want to use. The last thing you want to hear is someone who tells you what to do and what should be used. But what’s the dress mode mean if  you skate badly? However, the most important things in your skate clothing is to dress comfortably and not interfere with the movement of your skateboard in the playground.

Sphere: Related Content

Executing Skateboard Trick

By: Admin

If you enjoy playing skateboard, certainly want to do a skateboard trick like pros. Just such as some famous players, like Bam Margera or Tony Hawk, then you have a lot of practicing to do. Surely  skateboard trick can make heads turn, so if you want to make people amazed, then you must learn how to make the correct various skateboard trick

Skateboarding Trick

Some of skateboard trick are very difficult like on skate the ramps or vert. This is a matter that must be anticipated in the play skateboard. This action will provide you with big air as well as enable you to perform different kinds of tricks.

If you are just starting out skateboard trick  on ramps, you might want to start on a mini ramp and not on the real vert ramp. This will help you master the tricks you want to perform on the ramps and it is also the place to skate that will minimize injuries on huge falls.

To start out, you will first want to do the Rock to Fakie trick. This skateboard trick is what most skateboarders learn first on the ramp. This particular trick is where the skateboarder will go to one side of the ramp and parks for a second on the edge of the ramp which is called the coping. Then, the skateboarder will rock back down the ramp.

The first thing you need to remember is that you should wear the proper safety equipment before you even start attempting this trick or any skateboarding trick.

The front foot should be a little closer to the nose of the board to perform the rock to fakie trick.

When you are rolling up the ramp, you need to stomp down a bit on the nose of the board just before you hit the coping. This will park your board on the edge of the ramp or the coping. Now, allow gravity to catch up with you and you should pop the trucks of the board back over the coping. This will allow you to ride back down on the ramp.

Although this seems very simple skateboard trick, but this is very effective that you can do on the road. So are strongly advised not to forget to wear appropriate safety equipment to avoid serious injury.

Sphere: Related Content